A nice benefit of having your security system installed professionally is that you seldom have to worry about it. Even so, there may be times where you must reset your alarms in Tulsa. If you’re utilizing a smart command panel, resetting usually needs only one or two tap of a button following a false alarm, power outage, or battery change.
Consult Your Owner’s Manual Before Resetting Your Alarm
A word to the wise before you begin to reset your Tulsa home security system, consult your instruction manual ahead of time. You wouldn’t want to undermine your home’s protection because you hit a button in error. In addition, your system could have changed if you switched from a numerical keypad to a fully digital system. Keep in mind that if you can't reset your system, don't hesitate to contact your trusted security specialists.
Resetting Your Tulsa Home Security System After A False Alarm
Typically, a false alarm takes place as a result of a sensor that was tripped by accident. You are able to utilize the central hub or bring up the ADT mobile app and tap the shield image and enter your unique passcode to switch off the alarms for these instances. You could receive notification from your monitoring professionals, but just let them know you experienced a false alarm.
Tips To Reset Your Alarm Following A Power Outage In Tulsa
When you lose power from a storm or other event, you might start to hear a repeated, high-pitched beep from your control panel. This signifies that your security is being powered by the backup battery. To reset your unit and halt the beeping, you must deactivate and reactivate your system.
But please note, if your power outage lasts for a longer period of time, you could need a total reset of your home’s security. Follow the directives in your user’s handbook -- normally by submitting your PIN number and pressing the designated button twice -- and you should be back in business. You could keep hearing the auxiliary power beeping, as it’s possible it won’t end until your battery reaches a full charge. Call your home security specialists if you keep having problems with your ADT system 20 hours after the power is resumed.
Reset Your Home Security System After Replacing A Battery
On occasion you will have to switch out a battery powering one of your home security components. In order to accomplish this, you will change your home’s defense to Test Mode so you don't trigger an accidental alarm. Once the you replace the old battery, change the alarm panel out of test mode and resume your usual settings. If the command center fails to recognize the component or the battery indicator is still on, you may require a full reset of your security system.
Resetting Your Tulsa Security System When Adding Or Removing Someone
Removing or adding people can be accomplished on your ADT Command interface and the ADT Control mobile app. You won’t need a system reset following the addition or deletion of users. However, if you find yourself moving to a new home that already has an ADT system, you should contact your residential security experts at (918) 308-5737 to establish a new plan. The installation tech will come out and switch out outdated parts, place other devices (if needed), and do a factory reset.
An Easy-To-Use Security System Is Only A Call Away
Resetting a home security system in Tulsa is a challenge if it fails to include understandable instructions and features. If the time has come to find your easy-to-use home security system, dial (918) 308-5737 or complete the form below. Our specialists are happy to help customize the ideal security system for your residence.