Categories

System malfunctions and false alarms can be aggravating, and more importantly, could prevent your security system from working how it should. Luckily, most troubles, from false alarms to dead batteries, are straightforward to correct. Check out our tips for troubleshooting your home alarm system in Tulsa. We’ll help keep your family safeguarded and your system operating the way it should.

Test Your Home Security System In Tulsa

One of the most effective ways to troubleshoot your property’s security is to test it yourself! Newer systems have a test mode so you don’t mistakenly trigger an emergency call. Once in test mode, do the following:

• Activate your system as you typically would when heading out.
• Open a window or door that uses a contact sensor, or test other sensors. Shut the window or door so it doesn’t trip the alarm as you switch out of test mode.
• Let the alarm resonate for 60 seconds to ensure communications with the security company and to make an entry in the alarm system log.
• Proceed to test equipment as needed
• Inspect the systems’s activity log to validate functionality.

Don’t worry, monitoring specialists can see that your system is undergoing a test. Just be sure to switch out of test mode when complete. It’s a good idea to test once a month or whenever you adjust your home’s internet or phone service.

Inspect The Positioning And Condition Of Motion Detectors

Although an integral element of your alarm system, motion detectors are prone to false alarms. Prevent them with a few basic troubleshooting steps.

• Conduct a visual check. Are there objects that could shift within the detection path of the sensor, like drapery caught in a breeze?
• Is the sensor dirty? Cobwebs, dirt, and debris can cause poor performance. Make sure the device is clean.
• Does the motion detector offer pet immunity you can activate? Some can be programmed to ignore pets weighing up to 100 pounds.
• When was the battery changed? A nearly depleted battery can affect performance or lead to false alarms.
• Is the sensor facing a heat source? Excessive heat from direct sun or a fireplace can cause an alarm.

Keep Batteries On Hand And Look Out For Low Battery Notifications

One of the great advantages of modern home security systems is that they’ll alert you when batteries are running low. If your system has a app or control panel, you’ll usually discover alerts there. Depending on your system, you may detect an intermittent beep when batteries are low. 

Motion sensors, contact sensors, smoke detectors, and other wireless devices have batteries that need to be replaced every so often. It’s wise to keep batteries ready and establish a replacement schedule. Some systems also have a rechargeable backup battery for the main control panel. This backup keeps your system running if you have a power outage and should recharge once power is back online. If it fails to recharge, you will need to replace it.

Troubleshooting Is Easy With ADT Home Security In Tulsa 

As the foremost name in home security, ADT designs systems that offer superior functionality and protection. Switching to test mode is straightforward through MyADT.com or the ADT+ app, and you’ll always be sent alerts when a battery is low. Get in touch with Secure24 Alarm Systems, an authorized ADT dealer, to find out more and design a system ideal for your Tulsa home and family. Place a call to (918) 308-5737 or fill out our form today!